Description

Crucible type vacuum coating machine is applied in textile industry and decorative industry. The process of vacuum metallizer equipment is putting crucible with aluminum ingot in the center of spiral coil (non-contact), then passing through high-frequency current in the coil to make aluminum ingots produce current, rising temperature until evaporation.

Application

Crucible metallizer is applied to make metallic yarn, hot stamping foil and other higher level packing material.

Character

1. All kinds of crucible coil can be adjusted separately in order to distribute vacuum coating film uniformly.
2. Evaporation speed is fast, so film and wire deviation, wire stuck and block wire fault would not exist. And the filigree yields of thickness distribute evenly to avoid burning of plastic. The quality of coating is more excellent, the phenomenon of the pin hole is less.
3. The evaporation rate of induction-heating roller coating machine is large. It is about 10 times larger than resistance heat source of evaporation boat.
4. In contrast with resistance heating coating, the distinguishing feature of vacuum metallizer equipment is that aluminum block could be enough dissolution and degassing, then form into the stable molten pool and eliminate the sudden sputtering of big droplet.
5. Evaporation source is filled with charge materials. The operation is simple and the temperature is easy to control. The source has much less strict requirements for purity aluminum ingots.

Parameters

Model	GM1100	GM1300	GM1650	GM2050	GM2500
Maximum	1100	1300	1650	2050	2500
Maximum rolling Diameter	Φ800 to 1000 mm
Graphite Crucible	7	9	11	13	16
Evaporation Pressure	4×10-2Pa
Water Consumption(m3/h)	35	40	45	50	60
Average power Consumption (kW)	170	200	240	280	330
Metallised materials (μm)	PET: 8 to 35 BOPP: 18 to 50 Nylon: 15 to 60
Maximum Rolling Speed	600 m/min to 720 m/min
Annual Output (ton)	2000	2500	3500	4500	5500